It is woven from fiberglass bulk
yarn, then coated with anti-alkaline resin and gum solution.
This tape is very strong self- adhesive, and uses in various
construction applications. Such as reinforces wall cracks,
board cracks, plasterboard cracks and marble cement; in addition
to repairing drywall joints.
Specifications:
1) Mesh size: 2.85 x 2.85mm (9 x 9 mesh)
2) Weave: leno
3) Width: 25,35,50,75, 100,150,200,300 and 1000mm,etc.
4) Length of roll: 20 – 150m or according to client requirements
5) Colors available: any color
Inner Packing:Each roll in a plastic bag
Outer Packing:Suitable number of rolls per carton
How to use:
1．Wall must be clean and dry；
2．Center and apply tape over the length of the joint and pressing firmly；
3．Apply a generous first coat of compound over the tape and through the mesh，making sure to completely fill the joint crevice．When the joint has been completely filled，wipe off any excess compound with the drywall knife leaving enough to cover the tape．
4．Let dry completely，then sand slightly．
5．Apply sufficient thin finishing coats to produce a smooth wall surface．
6．Cut of butted boards do not have a tapered edge．Therefore，special care must be taken to assure proper compound penetration of all joints．This may result in slight build—up of compound that will require an increased amount of edge feathering． |
